AMA Airsoft MOLLE Plate Carrier w/ 6 Pouches - OD GREEN

SKU: DT-V-312G Airsoft Megastore ArmoryOut of stock

  • Operator grade quality, constructed of rugged 600x600D (denier) tactical StrikeForce nylon
  • MOLLE: integrated modular webbing on front and rear of vest for easy gear customization/mounting
  • Integrated front and rear ballistic plate compartments; pull down hook & loop-enclosed flaps for open/close. Plates secured with hook/loop/high-tensile metallic wire closure.
  • 1 Integrated high strength Admin Pouch (for maps, key documents, ID, passport, pen, etc)
  • 2 Integrated high strength pistol mag pouches with hook & loop open/close flaps
  • 1 Integrated flashlight/tac-light pouch (adjacent to the admin pouch)
  • 1 Integrated Side Ammo pouch, can also hold misc. accessories and/or shells with zippered opening and integrated webbing
  • 1 Integrated deterrent spray pouch (for pepper spray and/or compact Tasers)
  • Heavy duty emergency drag handle designed for efficient extraction
  • Adjustable size (for height and waist). Side (waist) adjustments secured by ultra-durable polymer buckles on either side. Universal fitment sizes S-XL

$47.95
Qty



AMA Airsoft MOLLE Plate Carrier w/ 6 Pouches - OD GREEN

If you want the BEST MOLLE Plate Carrier set-up, look no further. We haven’t been more excited about any single product here at Airsoft Megastore since the inception of the AMA line, and the StrikeForce MOLLE plate carrier vest blows all its competitors straight out of the water, combining value, performance, build quality and overall usability into a plate carrier package that is SO GOOD, we can barely contain ourselves in describing this product.

Dare to compare: Comparable 600x600D MOLLE plate carrier modular vests sell for $100-$200, SOME without any pouches at all. We encourage you to thoroughly do your research, because you’ll be just as shocked us when you find that the AMA StrikeForce MOLLE plate carrier is hands down the BEST value on the market for a similar set-up!

The Pantac Molle Plate Carrier, which is similar in its set-up, runs about $145 - $190, depending on where you’re looking. And in a side-by-side comparison, the build quality on the AMA is IDENTICAL. When the manufacturer subjected both the Pantac and the AMA to a stress test measuring the strength of the MOLLE webbing, the AMA webbing fared better 4 out of 5 times, making it a remarkably high quality product at a shockingly low price.

The set-up: This highly anticipated StrikeForce MOLLE plate carrier modular vest is constructed of operator-grade 600x600D nylon for maximum protection and features SIX (x6) pre-integrated pouches that are INCLUDED in the package from the manufacturer. It comes from the manufacturer with two basic hardened protective structure-holding plates pre-installed in both the front and back of the vest. Both front and back feature a plate carrier compartment that can be opened up to reveal space for two more (one in the front and one in the back) ballistics plates. The pre-installed plates are MORE than enough to protect from BB rounds, but if you’re a gear junkie, or you just want more ballistics grade protection, this vest is ready to handle the integration of any standard sized 10" x 13" armor plates.

From the factory, the StrikeForce vest is already equipped with an admin pouch (for maps, docs, ID, etc), two pistol magazine pouches, a flashlight/tac-light pouch, an ammo pouch and a spare deterrent spray pouch (for pepper spray and/or compact Tasers). All are attached using the modular MOLLE webbing, which means they can be just as easily detached; after all, the vest is highly customizable due to the advanced MOLLE design and can be retrofitted with the proper pouches/gear to best suit your tactical needs, which is an outstanding advantage of a plate carrier equipped with MOLLE webbing over more traditional, non-modular vests/chest rigs.

The MOLLE advantage: MOLLE, which stands for Modular Lightweight Load Carrying Equipment, allows users of MOLLE-equipped gear the convenience of modifying (hence dubbed "modular") their gear to suit their tactical needs. This advantage, which increases on-field versatility and effectiveness, is the reason why MOLLE gear is becoming the new standard for everyone from the likes of Law Enforcement and Military personnel who REQUIRE the very best in gear down to the recreational Airsoft player. The uses are endless for the AMA MOLLE StrikeForce plate carrier system, as essentially you can have different set-ups for your different weapons using this plate carrier as your single constant/base which you can customize.


In the Box

1X Plate Carrier

Specifications:

Brand Airsoft Megastore Armory
Build 600D Nylon
Size Universal Fitment (S-XL)
Color OD Green



AMA Airsoft MOLLE Plate Carrier w/ 6 Pouches - OD GREEN Quick Compare

This feature is currently unavailable.

Rate & Write a Review

Reviews


Rate & Write a Review

Dell U2717D Q&A

Does the Dell 3 year warranty still apply if you purchase from BHPHOTO?2 Answers
With the proper usb-c adapter it will connect just fine. Answered by Nick L. purchased on Aug 2, 2016
Yes, it has a 100 mm by 100 mm VESA mount for attachment to standard wall mounts. Answered by Roger L. purchased on Oct 2, 2016
Does the Dell 3 year warranty still apply if you purchase from BHPHOTO?2 Answers
With the proper usb-c adapter it will connect just fine. Answered by Nick L. purchased on Aug 2, 2016
Yes, it has a 100 mm by 100 mm VESA mount for attachment to standard wall mounts. Answered by Roger L. purchased on Oct 2, 2016
Does the Dell 3 year warranty still apply if you purchase from BHPHOTO?2 Answers
With the proper usb-c adapter it will connect just fine. Answered by Nick L. purchased on Aug 2, 2016
Yes, it has a 100 mm by 100 mm VESA mount for attachment to standard wall mounts. Answered by Roger L. purchased on Oct 2, 2016
Does the Dell 3 year warranty still apply if you purchase from BHPHOTO?2 Answers
With the proper usb-c adapter it will connect just fine. Answered by Nick L. purchased on Aug 2, 2016
Yes, it has a 100 mm by 100 mm VESA mount for attachment to standard wall mounts. Answered by Roger L. purchased on Oct 2, 2016
Does the Dell 3 year warranty still apply if you purchase from BHPHOTO?2 Answers
With the proper usb-c adapter it will connect just fine. Answered by Nick L. purchased on Aug 2, 2016
Yes, it has a 100 mm by 100 mm VESA mount for attachment to standard wall mounts. Answered by Roger L. purchased on Oct 2, 2016
VIEW ALL


Connect with us.